You are here: Home » Products » Special Truck » Drilling Rig Truck » SINOTRUK HOWO CDC 600K 600m Well Drilling Rig Truck

SINOTRUK HOWO CDC 600K 600m Well Drilling Rig Truck

SINOTRUK/COMMAND CDC 600K Water Well Drilling Rig Truck


Availability:



Inquire

Model:
CDC-600K
Brand:
SINOTRUK/CTS&COMMAND

rig truck water well drilling well drilling truck CDC 600K 600m rig 600m rig truck

PRODUCT CATEGORY

Product Description

HOWO 6X6 300Meters, 350meters,400meters, 600 meters Well Drilling Machine

drill rig truck

Specifications

Cabin	HOWO 76 cab, with air condition and one bed. 70°hydraulically tillable to the front as attached photo for ref.
Vehicle Main Dimensions	Overall dimensions (L x W x H) mm	1250025504300
Vehicle Main Dimensions	Wheel base (mm)	5800+1400
Weight in KGS	Tare Weight	32000kgs
	Loading capacity	40000
	Front axles loading capacity	1x9000
	Rear axles loading capacity	2x16000
Max. driving speed（km/h）		102
Engine	Brand	SINOTRUK
	Model	WD615.96C, 380HP
	Type	4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charging and inter-cooling
	Horse Power（HP)	380HP
	Emission standard	Euro III
Gearbox	HW19710, 10 Forward gears & 2 reverse gears
Steering	ZF brand power steering, hydraulic steering with power assistance
Clutch	Reinforced diaphragm clutch, diameter 430 mm
Fuel tank	400 L
Tire	12.00R20 steel tyre, 11 pieces including one spare
Brakes	Service brake: dual circuit compressed air brake
	Parking brake :(emergency brake): spring energy, compressed air operating on rear wheels
	Auxiliary brake: engine exhaust brake
Drilling system	Drill tower load: 40T Operation：Two hydraulic support cylinders Drill tower height：9M or customized Drill dept: 300m, 350m, 400m, 600m or as customized Drilling technology can be used: mud positive circulation, DTH-hammer, air lift reverse circulation, Mud DTH-hammer. For drilling system, we can make according to customized.
Drilling system	Feed System (Pull Down Cylinder) Make & model: CTS &COMMAND MACHINE Feed cylinder size: ø rod x ø cylinder x stroke: 125mm95mm4500mm. Type of design (two piston rods or one rod): TWO Min. drilling head traveling stroke (m): 9m Min. Pull up chain strength in tension: 154,000kg Min. Pull down chain strength in tension: 100,000 Kg Min. Pull up capacity (kg): 40,000 kg Min. Pull down capacity (kg): 30,000 kg Pull up speed - slow (mpm): ~ 6 Pull up speed - rapid (mpm): ~ 53 Pull down speed - slow (mpm): ~ 5 Pull down speed - rapid (mpm): ~ 37 Feed system is chain type and supported by roller
	Leveling Jacks Make & model: CZT- 1& COMMAND MACHINE] Leveling Jack Cylinder Size: ø rod x ø cylinder x stroke (mm) Min. Lifting capacity of each jack (kg): 30,000 Min. Ground clearance (mm): 750
	Top Head Rotary Gear Box (Drill Head) Make & model: CD-6 &COMMAND MACHINE] Reduction ratio: 21:56 Top drive spindle bore (mm): [63MM] Min. spindle pull up capacity (kg): 40,000 kg Spindle speed range (rpm): Low speed range & (Min. torque - kg-m): 0-60 & 2000 kg-m High speed range & (Min. torque - kg-m): 60 – 120 & 900 kg-m
	Deck Engine Make and model cummins QSX15-C600 Engine Hp and rpm: 600HP and 1800 rpm
	Mud Pump Make & model: BW1000/6 &COMMAND MACHINE Piston diameter and stroke (in): 4 inch Min. discharge capacity (l/min): 2000 Min. Working pressure (psi): 880 Suction and delivery valve type: 3 inch
	Mast Min. Gross nominal capacity (kg): 60,000 kg Maximum hook load capacity (kg): 50,000 kg Mast Length, width & depth (mm): 14000mm 1200mm1000mm] Min. over all height from the ground up to top of the mast (m): 12m
	Main Hoist Make & model: [YSD-4 &COMMAND MACHINE] Wire rope diameter (mm) & length (m): ø16 x 75 Min. hoisting capacity (kg): 40,000 Minimum hoisting speed (m/min):45
	Power Torque Make & model: [CXK-6 & COMMAND MACHINE] Min. loading capacity (kg): 40,000 kg Min. break out torque (kg-m): 600
	Water/ Foam Injection Pump Make & model: CPM-3 &COMMAND MACHINE Piston diameter and stroke (in): 90 L/min Min. discharge capacity (l/min): 90 Min. Working pressure bar: 40 BAR Suction and delivery valve type: 1 inc